HP OfficeJet Pro 9015 Wireless Setup | Manual Connection process

HP OfficeJet Pro 9015 Wireless Setup

HP Officejet Pro 9015 is a multi-function color printer with faxing, copying, printing and scanning functions. It support small home based office to industrial purposes. Find the device drivers for the printer in 123.hp.com/setup 9015 . These printers produce low cost per page for high quality prints. And has modern technology such as built in Wi-Fi connectivity.
HP Officejet Pro 9015 supports mobile printing technology such as wireless direct printing, Mopria Print Service, Apple AirPrint and HP ePrint. And assist yellow, Cyan, black and magenta. HP Officejet Pro 9015 can print documents and photos from USB flash drive. It has fax features such as auto reduction, automatic redialing and fax forwarding.

123.hp.com/setup 9015 - Initialize HP Officejet Pro 9015

• First peel off the cardboard box of the HP Officejet Pro 9015 printer box. You can find the software installation CD the same software can also be in downloaded from 123.hp.com/setup 9015 . Next there are set up poster, basic set up instructions, Get Started Guide, caution flyer, set of ink cartridges, power cord, fax cord and HP Instant Ink Card.
• Now tilt the box and place in an even surface and pull out the cover contains the printer. Remove the Styrofoam caps on the both sides. Note that all the packing materials that came with printer are recyclable. Then remove all the blue tape around the tape and slide out the input tray and remove any packing materials inside it and close the input tray.
• Pull out clear plastic on all the reflective surfaces and now lift the scanner lid you can find a Styrofoam sheet inside the scanned bed. Let’s power ON the HP Officejet Pro 9015 printer, pull out the power cord and plug in into the printer power cord and to the wall outlet. Switch on the printer. The printer takes time to get initialize from the printer control panel choose date, time, country and language.

HP Officejet Pro 9015 printer setup

• The printer prompt us to install the ink cartridges, open the ink cartridge access door wait for the carriage to comes to ink access area.
• Then remove the insert from the carriage take out the ink cartridge bundle note the color in the cartridges as well the slot to insert the ink cartridges appropriately.
• Before inserting pull out the orange tab around the cartridges keep in mind not to touch those copper contacts which may damage the ink flow.
• Then close the ink cartridge access door the printer and touch ok in the printer display. Now the printer prompts to install paper.

• Slide out the input tray and lift the output tray. Adjust the paper width guide to load fresh paper inside HP Officejet Pro 9015 printer and touch OK in the printer display.
• Then slide out the output tray the printer prints the alignment page after aligning the print head.
• Next open the scanner lid and place the alignment page with the down side follow the markings on the scanner lid to properly place the alignment page.
• Touch scan in the display after scanning and aligning the print head a success message displays. If you don’t receive on visit 123.hp.com/ojpro9015 to debug the issue.

123.hp.com/setup 9015 - Network connection by Wireless Setup Wizard

Mac OS wireless set up

• First click the wireless icon on the printer control panel and touch the setup icon. In the following screen touch Wireless Setup Wizard.
• Before starting the process collect the network name and network password. Turn on the router, printer and computer.
• Now select the network name from the list of networks and enter the network password and click OK.
• If the list doesn’t have your network name touch “enter new network name” then enter the password and click done.
• Having any issues with mac wireless setup navigate to 123.hp.com/setup 9015 or 123.hp.com/ojpro9015  .

Windows wireless set up

• Initially connect the printer to the wireless network and download the printer software and driver from 123.hp.com/setup 9015.
• Then switch ON the router and computer. Collect the network name and network password. Remove any USB cable or any Ethernet connection from the HP Officejet Pro printer.
• Go to the printer control panel touch wireless icon and then setup icon. Then choose Wireless Setup Wizard in the following screen.
• Choose your network name from the list and enter your network password and touch done. If your network name is not listed touch Enter New Network Name and enter your name and touch OK.

Network connection by Wi-Fi Protected Setup (WPS)

PUSH method

PIN method

1. In the HP Officejet Pro 9015 printer push the wireless button for few seconds the wireless LED light starts blinking.
2. The same way in the wireless router find and press the WPS button for few seconds and leave it takes few moments to establish the connection.
3. Lastly confirm the connection establishment between the router and the printer by steady led light near the wireless symbol in the printer and the router