views
Placing and Finishing Concrete
Finishing Setup
Jointing is needed to eliminate unsightly random cracks. Contraction joints are constructed with a hand groover or by inserting strips of plastic, wood, metal, or preformed combined material into the unhardened concrete.
concrete sidewalk installation nyc
After joining the concrete, it should be paddled with a wood or metal hand float or with a finishing machine operating float blades. These implants aggregate particles just under the surface; remove slight marks, humps, and voids; and compact the mortar at the character in practice for further finishing processes.
For further details contact us at:
Email: rconstructionny@gmail.com
Contact Us: 718-971-4362
Address: 6513 17th Ave Brooklyn NY 11204
Where a soft, hard, thick surface is desired, floating should be observed by steel troweling. Troweling should not be accomplished on a texture that has not been washed; troweling after only bull-floating is not a satisfactory finish process. A slip-resistant surface can be made by brooming before the concrete has comprehensively hardened, but it should be adequately hard to retain the scoring appearance.